M Series Gasoline&LPG Forklifts>>Description

1.8T

Forklift Show

1.8T

More Images

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications. 
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.

 



ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.



HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.




COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.



ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.



A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace. 
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.



EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.

Engine

Forklift Specification

General 1 Model   FGL18T-M2WB3
2 Rated capacity Kg 1800
3 Load centre mm 500
Characteristic&Dimension 4 Lift height mm 3000
5 Free lift height mm 135
6 Fork size L×W×T mm 920×100×35
7 Fork regulating range Min./Max. mm 200/890
8 Mast tilt angle F/R Deg 6°/12°
9 Front overhang mm 400
10 Rear overhang mm 510
11 Min. ground clearance(Bottom of mast) mm 130
12 Overall dimensions Length to face of fork        (without fork) mm 2300
13 Overall width mm 1070
14 Mast lowered height mm 2015
15 Mast extended height            (with backrest) mm 3984
16 Overhead guard height mm 2110
17 Turning radius(outside) mm 2105
18 Min. right angle stacking aisle width (add load length and clearance) pallet size a12=1000,b12=1200 mm 3705
pallet size a12=1200,b12=800 mm 3905
Performance 19 Speed Travel(Unladen) Km/h 14.5
20 Lifting(Laden) mm/s 380
21 Lowering(Laden) mm/s 450
22 Max. Drawbar pull(Laden/unladen) KN 17/15
23 Max. Gradeability(Laden) 20
Tyre 24 Tyre Front mm 6.50-10-10PR
25 Rear mm 5.00-8-8 PR
26 Tread Front mm 890
27 Rear mm 920
28 Wheelbase mm 1400
Weight 29 Self weight kg 2800
30 Weight Distribution Laden Front  Axle kg 3950
31 Rear Axle kg 650
32 Unladen Front Axle kg 1260
33 Rear Axle kg 1540
Power&Transmission 34 Battery Voltage/Capacity V/Ah 12/60
35   Fuel tank capacity L 50
36 Transmission Manufacture   China
37 Type   Powershift
38 Stage F/R   1/1
39 Operating pressure(For attachments) Mpa 14.5

Mast Specification

Type Model Max. fork height Overall height Free lift
Lowered Extended With backrest Without backrest
With backrest without backrest
1.8t 1.8t 1.8t
mm mm mm mm mm mm
wide view   2-stage mast M330 3300 2165 4284 3813 135 135
M350 3500 2265 4484 4013 135 135
M370 3700 2365 4684 4213 135 135
M400 4000 2565 4984 4513 135 135
M450 4500 2815 5484 5013 135 135
M500 5000 3065 5984 5513 135 135
M550 5500 3365 6484 6013 135 135
M600 6000 3615 6984 6513 135 135
full free   2-stage mast FM300 3000 2015 3984 3513 1415 1030
FM330 3300 2165 4284 3813 1565 1180
FM350 3500 2265 4484 4013 1665 1280
Full free   3-stage mast TFM435 4350 2015 5334 4863 1420 1030
TFM450 4500 2065 5484 5013 1470 1080
TFM480 4800 2165 5784 5313 1570 1180
TFM500 5000 2265 5984 5513 1670 1280
TFM540 5400 2390 6384 5913 1795 1405
TFM600 6000 2615 6984 6513 2020 1630
TFM650 6500 2830 7484 7010 2235 1845

 

Type Front Overhang Tilt range Capacity
FWD BWD load capacity at 500mm
1.8t Single tire Double tire
1.8t 1.8t
mm Deg Deg kg kg
wide view   2-stage mast 400 6 12 1800
400 6 12 1800
400 6 6 1800
400 6 6 1800
400 6 6 1500
400 6 6 1100 1400
400 3 6 1000 1200
400 3 6 600 1000
full free   2-stage mast 400 6 12 1800
400 6 12 1800
400 6 12 1800
Full free   3-stage mast 400 6 6 1500
400 6 6 1400
400 6 6 1300
400 6 6 1200 1300
400 3 6 1050 1100
400 3 6 550 900
400 3 6 300 700

Add:No.1 Jinxin Road, Lushan Industrial Area, Fuyang, Hangzhou, Zhejiang province, China.
AP&MEA
Sales Tel: 0086-571-28205156 0086-571-28037691
Europe:
Sales Tel: 0086-571-28205156 0086-571-28037691
LAM&Brazil:
Sales Tel:0086-571-28195513 0086-571-28037691

© Copyright 2019 .All rights reserved.
Website:http://www.maxforklift.com

Email:For sales vip02@maxforklift.comivy@maxforklift.com
For spare parts helen.he@maxforklift.comparts02@maxforklift.com

Links | Products | Support By 中国叉车网(www.chinaforklift.com)
浙ICP备17058799号
Construction Machines Forklift Truck Forklifts Forklift Truck Light Truck Max Facebook Truck Shock Absorber
MAX Baike Forklift Faq Forklift Forklift Twitter Forklift Three Wheel Battery Forklift

浙公网安备 33010302000805号

Cookies help provide a better service for you. By using our services, you agree to our use of cookies. For further information,learn more here
I agree
I disagree, don’t use cookies