Montacargas con motor Diesel>>Description

1.5-1.8T(Series M)

Forklift Show

1.5-1.8T(Series M)

More Images

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications.
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.



ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.



HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.




COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.



ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.



A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace.
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.



EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.

Engine

Forklift Specification

General 1 Model   FD15T-M2WC3 FD18T-M2WC3
2 Optional Type   G(6)3
3 Power type   Diesel
4 Rated capacity kg 1500 1800
5 Load centre mm 500
Characteristic &Dimension 6 Lift height mm 3000 3000
7 Free lift height mm 135
8 Fork size LxWxT mm 920x100x35 920x100x35
9 Fork regulating range Min./Max. mm 200/890
10 Mast tilt angle F/R Deg 6°/12°
11 Front overhang mm 400
12 Rear overhang mm 465 510
13 Min. ground clearance(Bottom of mast) mm 130
14 Overall dimensions Length to face of fork (without fork) mm 2255 2300
15 Overall width mm 1070
16 Mast lowered height mm 2015
17 Mast extended height (with backrest) mm 3984
18 Overhead guard height mm 2110
19 Turning radius(outside) mm 2040 2075
20 Min. right angle stacking aisle width (add load length and clearance) mm 1825 1857
Performance 21 Speed Travel(Unladen) km/h 14.5
22 Lifting(Laden) mm/s 550(WC3)
23 Lowering(Laden) mm/s 450
24 Max. Drawbar pull(Laden/unladen) KN 18/16(WC3)
 
25 Max. Gradeability(Laden) % 20
Chassis 26 Tyre Front   6.50-10-10PR
27 Rear   5.00-8-8 PR
28 Tread Front mm 890
29 Rear mm 920
30 Wheelbase mm 1400
Weight 31 Self weight kg 2590 2800
32 Weight Distribution Laden Front Axle kg 3520 3950
33 Rear Axle kg 570 650
34 Unladen Front Axle kg 1160 1260
35 Rear Axle kg 1430 1540
Battery 36 Battery Voltage/Capacity V/Ah 12/90
Transmission 37 Transmission Manufacture   China
38 Type   Powershift
39 Stage F/R   1月1日
40 Operating pressure(For attachments) MPa 14.5

Mast Specification

Type Model Max. fork height Overall height Free lift
Lowered Extended With Without
With backrest without backrest    
1.5t 1.8t 1.5t 1.8t 1.5t 1.8t backrest backrest
mm mm mm mm mm mm mm mm mm
wide view 2-stage mast M330 3300 2165 2165 4284 4284 3813 3813 135 135
M350 3500 2265 2265 4484 4484 4013 4013 135 135
M370 3700 2365 2365 4684 4684 4213 4213 135 135
M400 4000 2565 2565 4984 4984 4513 4513 135 135
M450 4500 2815 2815 5484 5484 5013 5013 135 135
M500 5000 3065 3065 5984 5984 5513 5513 135 135
M550 5500 3365 3365 6484 6484 6013 6013 135 135
M600 6000 3615 3615 6984 6984 6513 6513 135 135
full free 2-stage mast FM300 3000 2015 2015 3984 3984 3513 3513 1415 1030
FM330 3300 2165 2165 4284 4284 3813 3813 1565 1180
FM350 3500 2265 2265 4484 4484 4013 4013 1665 1280
Full free 3-stage mast TFM435 4350 2015 2015 5334 5334 4863 4863 1420 1030
TFM450 4500 2065 2065 5484 5484 5013 5013 1470 1080
TFM480 4800 2165 2165 5784 5784 5313 5313 1570 1180
TFM500 5000 2265 2265 5984 5984 5513 5513 1670 1280
TFM540 5400 2390 2390 6384 6384 5913 5913 1795 1405
TFM600 6000 2615 2615 6984 6984 6513 6513 2020 1630
TFM650 6500 2830 2830 7484 7484 7010 7010 2235 1845

 

ype Model Max. fork height Front Overhang Tilt range Capacity
FWD BWD load capacity at 500mm
1.5t 1.8t Single tire Double tire
1.5t 1.8t 1.5t 1.8t
mm mm mm Deg Deg kg kg kg kg
wide view 2-stage mast M330 3300 400 400 6 12 1500 1800
M350 3500 400 400 6 12 1500 1800
M370 3700 400 400 6 6 1500 1800
M400 4000 400 400 6 6 1500 1800
M450 4500 400 400 6 6 1300 1500
M500 5000 400 400 6 6 1000 1100 1200 1400
M550 5500 400 400 3 6 800 1000 1000 1200
M600 6000 400 400 3 6 500 600 800 1000
full free 2-stage mast FM300 3000 400 400 6 12 1500 1800
FM330 3300 400 400 6 12 1500 1800
FM350 3500 400 400 6 12 1500 1800
Full free 3-stage mast TFM435 4350 400 400 6 6 1250 1500
TFM450 4500 400 400 6 6 1200 1400
TFM480 4800 400 400 6 6 1100 1300
TFM500 5000 400 400 6 6 950 1200 1150 1300
TFM540 5400 400 400 3 6 900 1050 950 1100
TFM600 6000 400 400 3 6 450 550 750 900
TFM650 6500 400 400 3 6 250 300 550 700

 

Oficina Internacional de Ventas:
      Jinxin Road 1, Lushan Industrial District
      Hangzhou, Provincia de Zhejiang (China)


Teléfono Latinoamérica y Brasil:+1-252-864-1474

Ventas, Consultas y Servicio al Cliente: info@maxforklift.com

Repuestos: parts@maxforklift.com

© Copyright 2019 .All rights reserved. Maximal Forklift (Zhejiang) Co., Ltd.
Internet:http://www.maxforklift.com/es
GM Email:gm@maxforklift.com
Links | Products | Support By 中国叉车网(www.chinaforklift.com)
浙ICP备17058799号
Si usted tiene alguna insatisfacción con nuestros productos o servicio por favor no dude en escribirnos por e-mail a gm@maxforklift.com (Gerencia General).

浙公网安备 33010302000805号

Las "cookies" ayudan a prestarle un mejor servicio. Utilizando nuestros servicios, está de acuerdo con que utilicemos "cookies". Puede ver más información al respecto aquí.
Estoy de acuerdo
No estoy de acuerdo, no utilicen "cookies"