M Series Diesel Forklifts>>Description

4.5-compact5.0T

Forklift Show

4.5-compact5.0T

More Images

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.

EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications.
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.

  

ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.

  

HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.
  

COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.

  

ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.

  

A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace.
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.
  

EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.
  

Engine


Forklift Specification

General 1 Model FD45T-M1WI3 FD50T-M1WI3
2 Optional type G(10)3/W(1)3
3 Rated capacity kg 4500 5000
4 Load centre mm 500 500
Characteristic
&
Dimension
5 Lift height mm 3000 3000
6 Free lift height mm 150 155
7 Fork size L×W×T mm 1070×150
×50
1070×150
×55
8 Fork regulating range Min./Max. mm 300/1380 300/1380
9 Mast tilt angle F/R Deg 6/12 6/12
10 Front overhang mm 590 595
11 Rear overhang mm 585 625
12 Min. ground clearance
(Bottom of mast)
mm 175 175
13 Overall dimensions Length to face of fork        
(without fork)
mm 3260 3310
14 Overall width mm 1490 1490
15 Mast lowered height mm 2265 2265
16 Mast extended height                               
 (with backrest)
mm 4230 4230
17 Overhead guard height mm 2265 2265
18 Turning radius(outside) mm 2920 2960
19 Min. right angle stacking aisle width 
(add load length and clearance)
mm 2600 2630
Performance 20 Speed Travel(Unladen) km/h 25 25
21 Lifting(Laden) mm/s 515 515
22 Lowering(Laden) mm/s 400 400
23 Max. Drawbar pull(Laden) KN 23 23
24 Max. Gradeability(Laden) % 20 18
Tyre 25 Tyre Front 300-15-18PR
26 Rear 7.00-12-12PR
27 Tread Front mm 1190
28 Rear mm 1130
29 Wheelbase mm 2100
30 Fuel tank capacity L 120
Weight 31 Self weight kg 6500 6720
32 Weight Distribution Laden Front  Axle kg 9650 10320
33 Rear Axle kg 1350 1400
34 Unladen Front Axle kg 2840 2960
35 Rear Axle kg 3660 3760
Power
&
Transmission
36 Battery Voltage/Capacity V/Ah 2×12/60
37 Transmission Manufacture China
38 Type Powershift
39 Stage F/R 2/1
40 Operating pressure
(For attachments)
Mpa 19

Mast Specification

M series 4.5-Compact5t mast:
Type Model Max. fork height Overall height Free lift Front Overhang Tilt range Capacity
Lowered Extended Without backrest With backrest FWD BWD load capacity at 500mm
Without backrest With backrest 4.5t 5t Single tyre
4.5t 5t 4.5t 5t 4.5t 5t 4.5t 5t 4.5t 5t 4.5t5t
mm mm mm mm mm mm mm mm mm mm mm mm Deg Deg kg kg
2-stage mast M330 3300 2415 2415 4130 4130 4520 4520 150 155 150 155 590 595 6 12 4500 5000
M350 3500 2515 2515 4330 4330 4720 4720 150 155 150 155 590 595 6 12 4500 5000
M375 3750 2640 2640 4580 4580 4970 4970 150 155 150 155 590 595 6 12 4380 4880
M400 4000 2815 2815 4830 4830 5220 5220 150 155 150 155 590 595 6 6 4300 4800
M425 4250 2940 2940 5080 5080 5470 5470 150 155 150 155 590 595 6 6 4050 4500
M450 4500 3065 3065 5330 5330 5720 5720 150 155 150 155 590 595 6 6 3800 4200
M475 4750 3190 3190 5580 5580 5970 5970 150 155 150 155 590 595 6 6 3550 3900
M500 5000 3315 3315 5830 5830 6220 6220 150 155 150 155 590 595 6 6 3200 3600
M550 5500 3615 3615 6330 6330 6720 6720 150 155 150 155 590 595 3 6 2600 2950
M600 6000 3865 3865 6830 6830 7220 7220 150 155 150 155 590 595 3 6 2100 2400
Full free   2-stage mast FM300 3000 2385 2385 3840 3840 4220 4220 1545 1165 600 605 6 12 4500 5000
FM330 3300 2535 2535 4140 4140 4520 4520 1695 1315 600 605 6 12 4500 5000
FM350 3500 2635 2635 4340 4340 4720 4720 1795 1415 600 605 6 12 4500 5000
FM375 3750 2760 2760 4590 4590 4970 4970 1920 1540 600 605 6 12 4500 5000
FM400 4000 2935 2935 4840 4840 5220 5220 2095 1715 600 605 6 6 4250 4750
Full free   3-stage mast TFM435 4350 2385 2385 5190 5190 5570 5570 1545 1165 630 635 6 6 3800 4200
TFM450 4500 2436 2436 5340 5340 5720 5720 1595 1216 630 635 6 6 3700 4100
TFM470 4700 2502 2502 5540 5540 5920 5920 1662 1282 630 635 6 6 3500 3900
TFM480 4800 2535 2535 5640 5640 6020 6020 1695 1315 630 635 6 6 3400 3800
TFM500 5000 2635 2635 5840 5840 6220 6220 1795 1415 630 635 6 6 3100 3500
TFM540 5400 2760 2760 6240 6240 6620 6620 1920 1540 630 635 3 6 2500 2850
TFM600 6000 3000 3000 6840 6840 7220 7220 2160 1780 630 635 3 6 2000 2300
TFM650 6500 3215 3215 7340 7340 7720 7720 2375 1995 630 635 3 6 1500 1700

Add:No.1 Jinxin Road, Lushan Industrial Area, Fuyang, Hangzhou, Zhejiang province, China.
Sales Tel: 0086-571-28815951 0086-571-28001569
     0086-571-28001570 0086-571-28935028
     0086-571-28979902
Fax:0086-571-28001569
Email:For sales info@maxforklift.com
For spare parts parts@maxforklift.com

© Copyright 2019 .All rights reserved. Maximal Forklift (Zhejiang) Co., Ltd.
Website:http://www.maxforklift.com
GM Email:gm@maxforklift.com
Links | Products | Support By 中国叉车网(www.chinaforklift.com)
浙ICP备17058799号
Construction Machines Forklift Truck Forklifts Forklift Truck Light Truck Max Facebook Truck Shock Absorber
MAX Baike Forklift Faq Forklift Forklift Twitter Forklift Three Wheel Battery Forklift

浙公网安备 33010302000805号