Montacargas con motor Dual (Gasolina y LPG)>>Description

5.0-7.0T(Series M)

Forklift Show

5.0-7.0T(Series M)

More Images

INTRODUCTION TO MAXIMAL

The M series is the first generation forklifts, designed by the MAXIMAL engineering team. A world class design features advanced technologies and superior componentry as produced by competitive vendors the world over. The finished appearance with safety color design has attracted an audience in local and the world markets.


EREGONOMIC DESIGN

Larger low positioned steps on either side and large grab bar allows easy access-egress for the operator.
The large premium suspension safety seat provides operator comfort and better productivity in all applications. 
Forward positioned hydraulic control and left hand directional travel levers are within easy reach of the operator. The large floor space with convenient positioned pedal arrangement permits optimum control and safe operation. The full rubber floor mat and synthetic mounted operator compartment reduces vibration and eliminates operator fatigue.



ROBUST WIDE VIEW MAST

Heavy I beam and C channel mast rails are positioned to create a wider forward view of the fork tips and the load. Large rollers roll more freely under load and side thrust rollers provide added lateral support especially in wide load applications. Both load rollers and thrust rollers are externally adjustable to maintain mast and carriage alignment and, reduce labor costs. Hydraulic hoses are positioned behind the rails for protection and enhance forward visibility through the mast.



HYDRAULIC SYESTEM COMPONENTS

Premium hydraulic hose, fittings and steel tubes are vital to operator safety and load handling. All hydraulic cylinders use premium seals eliminating leaks and pressure loss. Main lift cylinder has a lowering speed valve to avoid rapid decent should a pressure lose occur in the lifting system.

Fully adjustable steering wheel allows multiple operator sizes and added comfort. Power steering provides precise control and easy maneuverability in confined spaces reducing operator fatigue and stress.




COOLING SYSTEMS

An all aluminum radiator core provides constant engine coolant temperature control through faster heat dissipation. Combination engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight. A newly designed composite fan blade provides better air flow through the cooling system tunnel and creates less noise and distraction for the operator.



ELECTRICAL SYSTEM

The lighted instrument panel is conveniently positioned relative to the operator’s line of sight. The LCD display monitors the machine’s vital components and electrical systems including travel speed and operating time. The monitor with integrated diagnostic system provides easy service and lower maintenance costs. The advanced design wiring harness uses waterproof connectors and an enclosed multiunit fuse module for improved circuit security and reliability.



A CLEAN GREEN MACHINE

Latest technology LPG and Diesel engines have EPA tier 3 and EU stage IIIA rated engines certified to meet/exceed CARB emissions. These High performance engines use less fuel per operating hour and eliminate harmful emissions in the workplace. 
Engine covers open to the rear allowing ample access to the engine compartment while the lift out floor plate provides easy access to the drive train components.



EFFICIENCY

MAXIMAL lift trucks are designed for the operator to be more productive And require less downtime for maintenance.

MAXIMAL value added lift trucks have earned a reputation for being tough, reliable and agile to handle more product with less operator effort in virtually every application.

Engine


Forklift Specification

Datos generales 1 Modelo   FL50T-MWE3 FL70T-MWE3
2 Tipo de Combustible   LPG
3 Opciones de Motor   /
4 Capacidad nominal kg 5000 7000
5 Centro de carga mm 600
Características & Dimensiones 6 Altura de elevación mm 3000
7 Elevación libre mm 195 205
8 Tamaño de la horquilla Largo x ancho x alto mm 1220×150×55 1220×150×65
9 Rango de regulación de horquillas  Minimo/máxima mm 300/1845
10 Angulo de inclinación del mástil Delantera/Trasera Grados 6/12
11 Voladizo delantero mm 580 590
12 Voladizo trasero mm 600 740
13 Distancia a piso (extremo inferior del mástil) mm 200
14 Dimensiones Generales  Largo total (sin horquilla) mm 3440 3580
15 Ancho total mm 1995
16 Altura de mástil colapsado mm 2500 2625
17 Altura extendida del mástil (con respaldo de carga) mm 4370
18 Altura de cabina de operador mm 2435
19 Radio de giro (externo) mm 3250 3370
20 Ancho mínimo de pasillo (agregar longitud y despeje de carga) mm 2960 3040
Desempeño 21 Velocidad Desplazamiento (Sin carga) km/h 19/20 19/20
22 Elevación (Con carga) mm/sec 400/420 380/400
23 Descenso (Con carga) mm/sec 500
24 Max. arrastre del pin de barra (Con carga/Sin carga) KN 53 52
25 Pendiente máxima de inclinación (Con carga) % 15 15
Llantas 26 Llanta Delantera   8.25-15-14PR 8.25-15-14PR
27 Trasera   8.25-15-14PR 8.25-15-14PR
28 Huella Delantera mm 1470 1470
29 Trasera mm 1700 1700
30 Distancia entre ejes mm 2250 2250
Peso 31 Peso propio total kg 8080 9450
32 Distribución del Peso Con carga Eje delantero kg 11250 14150
33 Eje trasero kg 1830 2300
34 Sin carga Eje delantero kg 3640 4250
35 Eje trasero kg 4440 5200
Transmission 36 Batería  Voltaje/Capacidad V/Ah 2×12/60
37 Transmisión Manufactura   China
38 Tipo   Hyd
39 Marcha Delantera/Trasera   2/2
40 Presión de operación (para aditamentos) MPa 19.5

Mast Specification

Tipo de Mástil Modelo  Máxima Altura de Horquillas Altura Total
Altura Mástil Colapsado Altura Mástil Extendido
Con Respaldo de Carga Sin Respaldo de Carga
5t 7t 5t 7t 5t 7t
mm mm mm mm mm mm mm
Mástil de 2 Etapas (Vista Amplia) M350 3500 2750 2875 4400 4500 4870 4870
M375 3750 2875 3000 4650 4750 5120 5120
M400 4000 3050 3175 4900 5000 5370 5370
M450 4500 3300 3425 5400 5500 5870 5870
M500 5000 3550 3675 5900 6000 6370 6370
M550 5500 3850 3975 6400 6500 6870 6870
M600 6000 4100 4225 6900 7000 7370 7370
Mástil de 2 Etapas (Elevación Libre Completa) FM300 3000 2625 4050 4370
FM330 3300 2775 4350 4670
FM350 3500 2875 4550 4870
Mástil de 3 Etapas (Elevación Libre Completa) TM400 4000 3175 5050 5370
TFM435 4350 2630 5350 5720
TFM480 4800 2780 5800 6170
TFM500 5000 2880 6000 6370
TFM540 5400 3005 6400 6770
TFM600 6000 3305 7000 7370
TFM650 6500 3530 7500 7870

 

Tipo de Mástil Elevación Libre Voladizo Delantero Inclinación de Mástil Capacidad
Con Respaldo de Carga Sin Respaldo de Carga Delantera Trasera Capacidad de Carga a 600mm
5t 7t  Llanta Doble 
5t 7t 5t 7t 5t 7t 5t-7t 5t 7t
mm mm mm mm mm mm Grados Grados kg kg
Mástil de 2 Etapas (Vista Amplia) 195 205 195 205 580 590 6 12 5000 7000
195 205 195 205 580 590 6 12 5000 7000
195 205 195 205 580 590 6 12 5000 7000
195 205 195 205 580 590 6 12 5000 7000
195 205 195 205 580 590 6 6 5000 7000
195 205 195 205 580 590 3 6 4750 6600
195 205 195 205 580 590 3 6 4400 6400
Mástil de 2 Etapas (Elevación Libre Completa) 1575 1255 587 597 6 12 5000 7000
1725 1405 587 597 6 12 5000 7000
1825 1500 587 597 6 12 5000 7000
Mástil de 3 Etapas (Elevación Libre Completa) 2125 1800 587 597 6 12 5000 7000
1630 1260 625 635 6 6 4500 6200
1780 1410 625 635 6 6 4500 6200
1880 1510 625 635 3 6 4500 6200
2005 1630 625 635 3 6 4400 6000
2305 1930 625 635 3 6 4200 5500
2530 2155 625 635 6 3 6 3900 5100

 

Oficina Internacional de Ventas:
      Jinxin Road 1, Lushan Industrial District
      Hangzhou, Provincia de Zhejiang (China)


Teléfono Latinoamérica y Brasil:+1-252-864-1474

Ventas, Consultas y Servicio al Cliente: info@maxforklift.com

Repuestos: parts@maxforklift.com

© Copyright 2019 .All rights reserved. Maximal Forklift (Zhejiang) Co., Ltd.
Internet:http://www.maxforklift.com/es
GM Email:gm@maxforklift.com
Links | Products | Support By 中国叉车网(www.chinaforklift.com)
浙ICP备17058799号
Si usted tiene alguna insatisfacción con nuestros productos o servicio por favor no dude en escribirnos por e-mail a gm@maxforklift.com (Gerencia General).

浙公网安备 33010302000805号

Las "cookies" ayudan a prestarle un mejor servicio. Utilizando nuestros servicios, está de acuerdo con que utilicemos "cookies". Puede ver más información al respecto aquí.
Estoy de acuerdo
No estoy de acuerdo, no utilicen "cookies"